Insert Mode Program. Parallel Routing (default). Over-the-top detuning in the optional Series routing. Program MIX 50% (CC#11). MicroPitch alongside H910 H949, with stereo use in mind.

Base Program: ADT effects using delays & detuning. In this H90 version, the general concept & base parameter ranges mirror a limited edition Mr. Black pedal, and add on to that feature set. Go buy the original gem if it’s an always-on effect in your chain. Otherwise, if you’re waiting for the next batch to drop …

* EXP1 controls [P] HotKnob, MicroPitch Mod Depth & Rate & Pitch B in both FX.
* EXP2 controls [A & B] HotKnobs, MicroPitch Feedback + Feedback A & B in H910 H949.
* Bonus Effect – Both EXP1 & EXP2 @ full Toe for barber pole (pitch) FX.
* EXP1 saved at mid-throw. EXP2 at the full Heel position.

HotKnob mappings, for fine-tuning the ranges of effects:

* [P] HotKnob (CW) increase Pitch A & B in MicroPitch & H910 H949 [default = 0 OR EXP1]
* [A] HotKnob (CW) adjust Delay A & B in MicroPitch [default = 24 OR EXP2].
* [B] HotKnob (CW) adjust Delay A & B in H910 H949 [default = 35 OR EXP2].

* MIDI CC# 1 MicroPitch Mod Source
* MIDI CC# 2 H910 H949 Type
* MIDI CC# 3 H910 H949 Pitch Ctl
* MIDI CC# 7 [P] Program Out Gain
* MIDI CC# 8 MicroPitch Mix
* MIDI CC#10 MicroPitch + H910 H949 Pitch Mix
* MIDI CC#11 [P] Program Mix
* MIDI CC#40 H910 H949 Mix
* MIDI CC#74 MicroPitch Tone

Other options:
* momentary FLEX pitch doubling in MicroPitch (most useful with deeper settings).
* momentary buffer REPEAT in H910 H949.
* HS1 – multi-modulation flangers, detuners & delays.
* HS1 – ‘COMP+ mode’ engages two additional detuners (via Pitch Mix + EXP1 control).
* HS2 – octaver up & down.
* EXP1 will partially override HS2 as renegade frequency shifter.
* HS3 – long trailing delays, panned & detuned.
* EXP2 will partially override HS3 as a micro-looper.
* Cycle HS2 or HS3 to restore any parameters changed by EXP1 or EXP2 use.

See the Program Notes for more information on the PERFORM switch mappings.