The max 8 program takes two source videos and alters them with modules and then that gets blended back into the main video stream I have 5 different 2 video stream blends where I take 4 of the outs from these blending and I mix them together in a 4 stream blending module. Then three of the streams get blended in a random mount that changes every 5 seconds about… the third stream blend is stable at 100%. I then go into the record modules … this is fine, but when I added the 4 blend module I had forgotten to remove one of the original video streams going to the video recording ,,, so one of my two recordings was dull and the other had two streams as the signal into the recording module … this error created the whole output with some funky type results in error. I ended up liking it and applied it to both the recording modules. two records take turns recording with the metro on off to not miss any of the video stream results … so both are not on at the same time but switch each time.. if you know of a better way to constantly record a video stream yet keep the video size uniform let me know. I did try the random video stream length but I did not like that much and went to 60 minute video sizes.. :) I am uploading the current video set now.

I could add a live video feed from a camera too … that should happen in the next revision,..