Insert Mode Program. Configured for Series Routing (default). More well mannered in optional Parallel Routing. Program MIX 50%. Aggravate into RingMod. Programmed for stereo use.
1.8.5 update required for the two new algorithms: Aggravate & Sticky Tape. This is the nasty sibling: screaming octave fuzz fed into a tracking ring mod, desperately seeking a carrier to latch onto.
EXP1 sweeps Pump Rate & Release in Aggravate, and Pitch, Speed & Manual Mod in RingMod. EXP2 (optional) controls Aggravate Pump Depth and RingMod Pitch Mod (saved at Heel).
All three HotKnobs are pre-programmed for making fine adjustments to several of the effects. Customize the sound, using these variations:
* [P] HotKnob (+/-) – adjust Aggravate Fuzz and Bias with RingMod Type [default = 20]
* [A] HotKnob (+/-) – change Aggravate Mids and Filter Env [default = 80].
* [B] HotKnob (+/-) – adjust RingMod Shape Mod Rate/Sens/Source [default = 20].
* MIDI CC#69 – Env Shape
* MIDI CC#70 – Thick
* MIDI CC#71 – Resonance
* MIDI CC#80 – Octave
Other options include LFO retrigger for both effects (simultaneously to re-sync). RingMod Brake/Speed [SLOW = ON] by default. Toggle to OFF for more pronounced modulation effects.
HS1 is multi-purpose: latch ON to switch to manual PUMP control with adjacent switch. It also boosts the Pump Depth, loses the Octave, and changes RingMod to a more intense String Type.
See the Program Notes for more information on the PERFORM switch mappings.
Brilliant as well as appropriately named!