Base Program
* Pause to engage reversed grain envelopes, deep filtering, decaying delays.
* Intense granular processing, covertly shadowing your input techniques.
* Current modulation state is spliced onto trailing delays.
* Processed delays can be frozen solid with infinite repeat.

* Insert Mode Program. Program Mix 50% (adjust for effect presence).
* GrainMod in Series with Ducked Delay.
* A touch more generic in the optional Parallel routing.
* All controls programmed for an interactive approach.

HOTKNOBS
Program [P] HotKnob – default (49 OR CC#1)
* Adjust all buffer lengths & delay times @ TAP: 100 BPM.

Preset [A] HotKnob – default (71 OR CC#2)
* Adjust all modulation rates & durations.
* Alternate foot control – primary expression pedal.

Preset [B] HotKnob – default (10 OR CC#3)
* Adjust all feedback levels.
* Alternate foot control – primary expression pedal.

PEDALS
EXP1 (saved @ full Heel)
* Pans grain positions, flips direction & decreases release time.
* Controls subsets of the [A] & [B] HotKnob parameter ranges.
* Use to dynamically control FX processing & total length of effect.

EXP2 (saved @ full Heel)
* Increases reverb.

SWITCHES
* AUX 1,2,3 mapped to HS1, HS2, HS3 (momentary action)
* AUX 4,5,6 mapped to HS1, HS2, HS3 (latching action)

Program Alternates
0). 100 Rev – Triangle mods – limit compress – long release – medium delays.
1). 25% Fwd – Ramp Up mods – moderate compress / short release – long pan delays.
2). 25% Rev – Ramp Down mods – heavy compress – med. release – wide delay offsets.
3). 100 Fwd – Square mods – light compress – instant release – dot 8th|1/4 delay.

PERFORM
1). [P] Act/Byp
2). TAP: 100 BPM
3). HS3 [L]
4). HS1 [L]
5). HS2 [L]
6). REPEAT [L]

See the Program Notes for the specifics on external control parameters & MIDI mappings.