Insert Mode Program. Configured for Series Routing (default). Dry input will be more forward in optional Parallel Routing. Program MIX 75%. Sticky Tape into Aggravate. Programmed for stereo use.

1.8.5 update required for the two new algorithms: Aggravate & Sticky Tape.

Pitch-warping modulation into spitty distortion and fuzz sweeps, with options for still more chaos. Hard attack component with a small picking ‘leak’, sitting just outside of a snappy & mostly wet configuration.

EXP1 sweeps Compression, W&F Amount and Flange Length in Sticky Tape with Aggravate Out Gain, Fuzz, Octave, Bias, Filter Env and Release. EXP2 (optional) sweeps Rec Drive, Filter and Width in Sticky Tape and Pump Depth & Rate in Aggravate (saved at Heel).

All three HotKnobs are pre-programmed for making fine adjustments to several of the effects. Customize the sound, using these variations:

* [P] HotKnob (+/-) – adjust Sticky Tape & Aggravate Mix [default = 70]
* [P] HotKnob mapped to MIDI CC#8.
* [A] HotKnob (+/-) – change Offset and W&F Rate in Sticky Tape [default = 85].
* [B] HotKnob (+/-) – adjust Aggravate Mids & Resonance [default = 35].

Other options include momentary or latching FLANGE in Sticky Tape, or LFO retrigger in Aggravate. HS1 enables manual PUMP use for Aggravate.

See the Program Notes for more information on the PERFORM switch mappings.