Insert Mode Program. Parallel Routing** (default). Program MIX 45-55% (via EXP2). Wormhole alongside H910 H949, with stereo use in mind.

**Equally interesting in optional Series Routing, for a completely different result. More sustained, with stacked intensity, and a sentient, machine-like quality. If you plan to use WARP front & center, switch this Program over to Series Routing (and SAVE).**

Base Program: Detuned medium reverb simultaneously fading out with plucked octaves. Shapeshift the core effect using some of the performance variables below:

* EXP1 controls the [B] HotKnob parameters listed below, plus Wormhole Stability & Out Gain with Feedback A & B, Type and Out Gain in H910 H949. This slow-down & speed-up effect scans through the hardware models, drops pitch two octaves, and increases delay regeneration levels.

* EXP2 controls the Program Mix, increases Stab Rate in Wormhole and changes Pitch Ctl in H910 H949. This effect puts the emphasis on reverb detuning with a unison glitch around mid-throw.

* Both expression pedals are saved at the full Heel position.
* HotKnob mappings, for making parameter adjustments:

* [P] HotKnob (+/-) change Wormhole Length & Pre Delay + Delay A & B in H910 H949 [default = 60]
* [A] HotKnob (+/-) adjust Wormhole Diameter, Low & High Decay [default = 20].
* [B] HotKnob (CCW) decrease Pitch A & B in H910 H949 [default = 100 OR EXP1].

* MIDI CC# 2 Wormhole Entry Field
* MIDI CC# 8 Wormhole Mix
* MIDI CC#10 H910 H949 Pitch Mix
* MIDI CC#40 H910 H949 Mix
* MIDI CC#75 Wormhole Accel
* MIDI CC#76 Wormhole Factor
* MIDI CC#77 Wormhole Mix
* MIDI CC#78 Wormhole Bass
* MIDI CC#79 Wormhole Treble

Other options:
* Momentary or latching WARP bending.
* Short momentary REPEAT glitching.
* HS1 – longer diffusion with detuned unison delays.
* HS3 – ping-pong delays pitch-shifted, and later entrance of a wide extended wash.
* Alternate ‘warp’ effects when cycling in & out of HotSwitches.

See the Program Notes for more information on the PERFORM switch mappings.