Sequence your Whammy MonoNeon via Midi! Zoia has to be in Auxiliary Mode for the bypass and footswitches to function properly.
Left footswitch: tap tempo
Middle footswitch: reset sequence
Right footswitch: bypass effect and Whammy
When receiving Midi tempo, tap and reset footswitches are ignored.

Page 0: Pitch and Glide
The red sequencer shifts the pitch of the Whammy in semitones counting from C4 as your standard, unaltered pitch. So C#4 = 1 semitone up, D4 = 2 semitones up, B3 = 1 semitone down and C5 = 12 semitones (1 octave) up.
The green sequence is Glide (portamento) per step: 0 = no portamento, 1 = glide into next step.

Page 1: Balance
The Audio Balance block on the top row acts as an optional wet/dry mix control for the Whammy. It must be connected using the 4 Cable Method for it to function (Guitar > Zoia input L, Zoia output L > Whammy input, Whammy output > Zoia input R, Zoia output R > amp).
The Value block on the 4th row is a bidirectional Glide master control: -1 = no portamento, +1 = portamento on all steps.
Both Balance and Glide master are Starred Settings for this patch.

Page 3: Midi Settings
Change the Midi channel on all of the top row blocks to the channel your Whammy MonoNeon listens to.

Page 4: Footswitches
Page 5: Math and stuff