Sequence your Whammy via Midi! Available for the Digitech Whammy 4, 5 and DT. Zoia has to be in Auxiliary Mode for the bypass and footswitches to function properly.
Left footswitch: tap tempo
Middle footswitch: reset sequence
Right footswitch: bypass effect and Whammy
When receiving Midi tempo, tap and reset footswitches are ignored.

Page 0: Pitch and Glide
The red sequencer shifts the pitch of the Whammy in semitones counting from C4 as your standard, unaltered pitch. So C#4 = 1 semitone up, D4 = 2 semitones up, B3 = 1 semitone down and C5 = 12 semitones (1 octave) up.
The green sequence is Glide (portamento) per step: 0 = no portamento, 1 = glide into next step.

Page 1: Balance
The Audio Balance block on the top row acts as an optional wet/dry mix control for the Whammy. It must be connected using the 4 Cable Method for it to function (Guitar > Zoia input L, Zoia output L > Whammy input, Whammy output > Zoia input R, Zoia output R > amp).
The Value block on the 4th row is a bidirectional Glide master control: -1 = no portamento, +1 = portamento on all steps.
Both Balance and Glide master are Starred Settings for this patch.

Page 3: Midi Settings
Change the Midi channel on all of the top row blocks to the channel your Whammy listens to.
Change the PC numbers of the first 3 blocks according to your Whammy version:
Whammy 4
– Up: PC 2
– Down: PC 5
– Bypass: between PC 17 and 33
Whammy DT
– Up: PC 0
– Down: PC 8
– Bypass: between PC 21 and 41
Whammy 5
– Up: PC 0 (Classic Mode) or 42 (Chords Mode)
– Down: PC 8 (Classic Mode) or 50 (Chords Mode)
– Bypass between PC 21 and 41 or 63 and 83

Page 4: Footswitches
Page 5: Math and stuff