Sequence your Whammy via Midi! Available for the Digitech Whammy 4, 5, DT, BassWhammy and MonoNeon. Zoia has to be in Auxiliary Mode for the bypass and footswitches to function properly.
Left footswitch: tap tempo
Middle footswitch: reset sequence
Right footswitch: bypass effect and Whammy
When receiving Midi tempo, tap and reset footswitches are ignored.

Page 0: Pitch and Glide
The red sequencer shifts the pitch of the Whammy in semitones counting from C4 as your standard, unaltered pitch. So C#4 = 1 semitone up, D4 = 2 semitones up, B3 = 1 semitone down and C5 = 12 semitones (1 octave) up.
The green sequence is Glide (portamento) per step: 0 = no portamento, 1 = glide into next step.

Page 1: Balance
The Audio Balance block on the top row acts as an optional wet/dry mix control for the Whammy. It must be connected using the 4 Cable Method for it to function (Guitar > Zoia input L, Zoia output L > Whammy input, Whammy output > Zoia input R, Zoia output R > amp).
The Value block on the 4th row is a bidirectional Glide master control: -1 = no portamento, +1 = portamento on all steps.
Both Balance and Glide master are Starred Settings for this patch.

Page 3: Midi Settings
Change the Midi channel on all of the top row blocks to the channel your Whammy listens to.
Change the PC numbers of the first 3 blocks according to your Whammy version:
Whammy 4
– Up: PC 3
– Down: PC 4
– Bypass: between PC 17 and 33
Whammy DT
– Up: PC 1
– Down: PC 7
– Bypass: between PC 21 and 41
Whammy 5
– Up: PC 1 (Classic Mode) 44 (Chords Mode)
– Down: PC 7 (Classic Mode) 49 (Chords Mode)
– Bypass between PC 21 and 41 or 63 and 83
BassWhammy and MonoNeon
– Up: PC 1 (Classic Mode) 43 (Chords Mode)
– Down: PC 8 (Classic Mode) 50 (Chords Mode)
– Bypass between PC 21 and 41 or 63 and 83

Page 4: Footswitches
Page 5: Math and stuff