Insert Mode Program. Configured for Parallel Routing or Series Routing. Program MIX 50%. Reverse alongside UltraTap. Programmed for stereo use.
Fragments of delays – forward & reverse grains – growling in from all directions. Foot control over sustained wash, diffusion, panning, tremolo & time modulation, taps’ envelope, micro-looping in dual buffers, and bursts of multi-taps.
EXP1 sweeps Depth Mod + Speed in Reverse, with Taper, Tone, Slurm, Manual Chop, Speed-Rise-Release & Width in UltraTap. EXP2 is mapped to the [P] HotKnob parameters (below) plus Delay A & B + Pan A & B in Reverse (saved at 5).
All three HotKnobs are pre-programmed for making fine adjustments to several of the effects. Customize the sound, using these variations:
* [P] HotKnob (+/-or EXP2) – adjust Reverse Feedback A & B + UltraTap Feedback [default = 5 or EXP2]
* [A] HotKnob (+/-) – adjust Filter in Reverse [default = 50].
* [B] HotKnob (+/-) – adjust Length & Taps in UltraTap [default = 44].
[Hint for the adventurous: The two individual delay buffers in Reverse & UltraTap will each interact with combinations of HotKnobs, HotSwitches and expression pedal ‘fixed wah’ positions].
* MIDI CC# 1 UltraTap Spread
* MIDI CC# 2 UltraTap Pre Delay
* MIDI CC# 3 UltraTap Chop (type)
* MIDI CC# 8 Reverse Mix
* MIDI CC#10 Reverse Delay Mix
* MIDI CC#40 UltraTap Mix
Other options: Momentary or latching REPEAT in Reverse, and retrigger LFO in UltraTap. HS1 latches Revesrse Feedback A & B at 100. HS3 momentarily scrambles a handful of UltraTap parameters for a time-shift burst.
See the Program Notes for more information on the PERFORM switch mappings.
