Insert Mode Program. Configured for Parallel Routing (default). More focused & centered in optional Series Routing. Program MIX 40-45% (via EXP1). Sticky Tape alongside Tape Echo. Programmed for stereo use.

1.8.5 update required for the two new algorithms: Aggravate & Sticky Tape.

If you don’t get the reference in the title, then it’s not very likely you will enjoy this Program. It’s what might happen with 4 EchoPlexes and 4 spare hands for manipulation. Starts life here as a long background echo: one ping, one pong. Step on EXP1, and tape spillage with variable mayhem ensues.

EXP1 sweeps Program Mix, with W&F Rate and Flange Length in Sticky Tape, plus Delay A & B and Feedback A & B in Tape Echo. EXP2 (optional) sweeps Offset and W&F Amount in Sticky Tape (saved at Heel).

All three HotKnobs are pre-programmed for making fine adjustments to several of the effects. Customize the sound, using these variations:

* [P] HotKnob (+/-) – adjust Filter in Sticky Tape & Tape Echo [default = 25]
* [A] HotKnob (+/-) – change Compression & Tape Speed in Sticky Tape [default = 75].
* [B] HotKnob (+/-) – adjust Wow & Flutter in Tape Echo [default = 30].

* MIDI CC#8 – Sticky Tape Mix
* MIDI CC#10 – Tape Echo Delay Mix
* MIDI CC#40 – Tape Echo Mix

Other options include momentary or latching FLANGE in Sticky Tape, or REPEAT in Tape Echo, adding some unique time-based effects. HS1 is a momentary overdriven boost.

See the Program Notes for more information on the PERFORM switch mappings.