A ambient delay/looper that looks to the Soma Cosmos for inspiration. Uses internal keybed for triggering an internal oscillator and/or external devices through CV or MIDI. Audio inputs used for bringing in external triggered devices for processing.
Assign button 1: feedback control
Assign button 2: “record” start/stop
Page 0: Keys
24 note keybed for triggering internal oscillator, also routed to CV outs (2 sets of pitch/gate outs). Top red buttons mute internal oscillator or dual mono audio inputs. Three envelope options available for internal oscillator and selectable from switch. Bottom right buttons engage low-pass filter, high-pass filter, and erase functions for delay lines.
Page 1: Osc
Settings for the internal oscillator. VCA envelopes (magenta) selected from switch on page 0.
Page 2: Delay
Delay lines for left/right side (up to 16 seconds) that eventually route into the other. Mixer for adjusting the gain and panning. Assign button 1 controls feedback by reducing the gain.
Page 3: Mod
Stereo chorus effect receiving from the delay lines, further modulates signal upon future repeats. Does not impact dry signal.
Page 4: Filter
Low-pass and high-pass filters for left/right delay lines. Does not impact dry signal. Envelopes adjust how quickly filter comes in/out. Quick engage buttons also found on this page.
Page 5: Erase
Reduces delay line mixer gain erasing information in future loops, quick engage button also present on this page
Page 6: Mix-Post FX
Balance dry/direct signal (internal osc and external audio) and delay/loop signal. Summed audio runs into a reverb lite.
Page 7: Extaudio
Gain/mute controls for dual mono audio inputs
Page 8: MIDIout
Settings for MIDI outputs, default set to channels 1 and 2