A quick go at recreating the Meris Ottobit Jr. Including – Filter, Bit Crush, Sample Rate (aliaser), various Stutters, pitch shift sequencer, filter sequencer and an added Sample Rate Sequencer.

Left stomp switch latches on/off the Dry/Wet Signal.
Middle stomp Switch momentarily activates pedal with stutter (freeze on Granular).
Right stomp switch Tap tempo for sequencers (if you have no MIDI clock in)

Page 0. Top left Audio In. Top Right Audio Out.
Top Row blue Pushbutton Bypass the effect to dry signal.
Main controls – Second row – Dials for the main Filter, Bit Crush and Sample Rate (value modules – adjust the left module of each)

Fourth row – Sequencer Multiplier in x1, x2, x3, x4, x5, x6, x8. (white Pushbuttons – have only one active at a time otherwise they multiply!) Far right Blue Value – dial for sequencer multiplier.

Bottom Row (Orange Pushbuttons – Only have one active at a time) Presets.
Left to Right =
No Sequencers,
Filter Sequence,
Pitch Sequence,
Filter and Pitch Sequence,
Sample Rate Sequence,
Dry and Sample Rate, Filter and Pitch Sequence

Page 1. Stutters – Purple Pushbuttons
Top Row – Left to Right – Slow to Fast Stutters.
Far right top (green pushbutton) Activates the Freeze for the Granular (here just for use when adjusting presets)
Second Row – Purple pushbuttons Left to Right – Slow to Fast Stutters With octave up.
Third Row – Left Purple Pushbutton Stutter with Slew on timing.
Pushbuttons connection strengths can be changed for different presets.

Page 2. Effects – No need to adjust here (use the main controls on page 0.) Just the chain of FX

Page 3. Clock – Switches
Top row is clock divider (Aqua) controlled from the Sequencer Multiplier on Page 0. For lowering the tempo adjust the clock divider here.

Page 4 and 5. Sequencers.
Sequencers for each effect here. Adjust the sequencer steps here for different sequences on each effect.