NEW_DistingEX_Editor_1.26_rev.4

Version for Disting EX with firmware 1.26 rev.4

This template is free but you can support me with a donation via Paypal to: https://paypal.me/hal9000mg

————————————————————————–

NEW FEATURES:

1. Improved interface for Mutable algorithms.

2. Improved loop selection in the LOOPER algorithm.

3. Updated the sequencer to match the “TOUCH_SEQUENCER” template, but with four tracks.

4. Updated the virtual keyboard, now with the ability to customize the preset list.

5. Added the DEV ID save function, with up to four positions, to automatically recall algorithm selections in mono or dual mode based on the selected MIDI channel.
This feature improves editor control across multiple DistingEX units!

Also available in a LIGHT version!

————————————————————————–

Follow revision updates via the ModWiggler forum:
https://modwiggler.com/forum/viewtopic.php?t=271242

Setting on the disting EX:

1. (optional) Activate the “Midi Parameters” to display on the Disting EX the parameter you are manipulating from the editor, navigate to:

Menu/Settings/MIDI-I2C page 1/Show MIDI parameter/set 1

2. (optional) Activate option 3 in “send CCs” the parameters will also update in the editor, navigate to:

Menu/Settings/MIDI-I2C page 1/Send CCs/set 3 Both

3. Disable soft thru, navigate to:

Menu/Settings/MIDI-I2C page 1/Soft thru/set 0

4. Attenuverter 1-6, from CC#1 to CC#6
From parameter 7 to 64, the CCs range from CC#7 to CC#64
(these change automatically by selecting “default first CC” and restarting the disting EX)

5. Set the “default first CC” to 7, navigate to:

Menu/Settings/MIDI-I2C page 1/Default first CC/set 7

6. Set “Algorithm Select CC” to 127, navigate to:

Menu/Settings/MIDI-I2C page 1/Algorithm Select CC/ set 127

7. RX/TX channel (single/dual L-R) = Custom

8. Device ID = RX/TX channel (single)

For set Device ID, navigate to:

Menu/Settings/MIDI-I2C page 2/SysEx Device ID

Good fun!

4 comments on “NEW_DistingEX_Editor_1.26_rev.4”
  • mikehirsch on said:

    for starters, how do you set the midi channel and SysEx Device ID in the editor. this is an important step to link the template to the disting ex hardware. i had a stroke and i have spent hours trying to figure this out. i would gladly donate if there was a clear step by step setup guide for this. i appreciate your hard work. you are deep in the code and fully understand what you hve developed here but the thought process of the basics was overlooked. i was a lotus notes workflow developer for years and in the case of this software i need the workflow steps to smoothly get up and running with this. your help is appreciated. if anyone else knowledgeable regarding this and could also chime in it would be appreciated as i would really like to use this tool and master the disting ex eventually tanks….

  • number289 on said:

    Hi, mikehirsch, I spent a while trying to figure it out, too, but finally got it working. I think these are the key elements:

    First, select the same device ID you set in the Disting on the MIDI CH / DEVICE ID box in this patch, and click the SAVE button next to ALGO/MIDI CH to DEV ID. I’m still not sure what the four selectable rectangles do.

    After that, set that MIDI CH / DEVICE ID back to whatever RX/TX channels set in your Disting (this one appears to only be for single mode, if you enter MK4 MODE in the patch, you will have separate MIDI channels for each left and right emulated MK4).

    Third thing: in the Connections box on the bottom right, make sure you have selected the connection corresponding to the MIDI device that your Disting is hooked up to (in TouchOSC’s connections ).

    It seems to me that you have to manually switch the Disting between single/dual and that the TouchOSC patch is not able to do this, but maybe there is something I am missing.

    Hope that helps. Let me know if you get it working!

  • hal9000mg on said:

    Your questions have made me realize that the new algorithm-saving feature isn’t entirely intuitive, so I will explain how it works.

    A quick note:
    This feature is primarily useful for those working with multiple Disting units. If you only own one unit, you simply need to set the MIDI CH/DEV ID to match your hardware—there is no need to save anything!

    However, if you have several Disting units, this feature becomes very useful: the “SAVE” button allows you to store various algorithms—in either single or dual mode—into the four slots represented by the rectangles.

    These configurations can then be recalled later by activating the “ALGO/MIDI CH to DEV ID” button.

    To illustrate with an example:

    Suppose I have four Disting EX units, each set to a specific MIDI CH/DEV ID… …different ones, such as 1, 8, 11, and 15.

    I can save the “Resonator” algorithm to the first slot, with the MIDI CH/DEV ID set to 1.
    To the second slot, I can save the “Looper” algorithm, with the MIDI CH/DEV ID set to 8.
    To the third slot, I can assign the dual “MK4 Mode”—featuring the C6-Vocoder on MIDI channel 3 and the B5-LFO on MIDI channel 6—with the MIDI CH/DEV ID set to 11.
    Finally, in the fourth slot, I can place the “Convolver” algorithm, with the MIDI CH/DEV ID set to 15.

    At this point, you simply need to activate the “ALGO/MIDI CH to DEV ID” button and navigate using the rectangular selection boxes; this allows you to control the various algorithms configured on each of the four hardware units via the Editor!

    I hope this is clear; in any case, a future revision will include dedicated “LOAD” and “SAVE” buttons for this specific function!

  • Leave a Reply

    • Platform:
    • Category: Utility
    • Revision: 4
    • License: The Unlicense
    • Uploaded: 3 months ago
    • Views: 446
      Likes: 1
      Downloads: 61
    Download
    Chat