Base Program
* Another covert multi-looper, concealed as tap blooms hitting the brakes.
* [HS1 OFF] reveals polytempic loop dubbing, shattered into fragments.

* Insert Mode Program. Program Mix 50%. Adjust for loop presence.
* Stutter into UltraTap. Nice & spacious in optional Parallel routing.
* All controls were programmed for interactive results.

INTERLINKS
* No perfect ‘dry-Erase’ function. [HS2 ON] = most efficient escape hatch.
* Or wait for all buffers & feedback to clear. Ex. [HS1 ON]____[HS1 OFF].
* Independent TAP controls (in mS) double as destructive loop modifiers.
* Halt loop record thru Bypass (zero decay / EXP2 Toe) – dry layer on top.

HOTKNOBS
Program [P] HotKnob – default (92 OR CC#70)
* Cross-mix buffer Lengths in Stutter & UltraTap.

Preset [A] HotKnob – default (75 OR CC#1)
* Adjust the (selected) spread depth / modulation depth over grains.

Preset [B] HotKnob – default (25 OR CC#18)
* Cross-mix amplitude envelopes with rate curves over multi-tap delays.

PEDALS
EXP1 (saved @ full Heel).
* S/T: Increases trigger rate, smearing length, LFO rate -> select target.
* U/T: Increases chop rate | env rise | release, decreases manual level.
* S/T + U/T: Cross-pans stereo width positions between effects.

EXP2 (saved @ full Heel)
* S/T: Increases reverb depth with reverb decay time.
* U/T: Controls multi-tap diffusion, modulation & loop decay levels.
* Infinite destruction-adjacent looping by default. Saved (Feedback 100).
* EXP2 overrides similar values set by HotKnobs and HotSwitches.

SWITCHES
* AUX 0 = default
* AUX 1,2,3 mapped to HS1, HS2, HS3 (momentary)
* AUX 4,5,6 mapped to HS1, HS2, HS3 (latching)

Program Alternates
0). Env trigs – detuned unisons – double-chop mods – skewed taps – zero loop decay.
1). Manual trigs – intervals up – ramping mods – tap braking – moderate decay time.
2). Env trigs – crescendo octaves – mod waves – accelerate – hard gate – 100% decay.
3). Chance trigs – RND intervals – deep filter/tremolo – tap weaves – minimal decay.

PERFORM
1). [P] Act/Byp (dry over loop)
2). TAP [A] – S/T Length
3). TAP [B] – U/T Length
4). HS1 [L] – ON default – manual stutter
5). STUTTER [L]
6). HS3 [L]

See the Program Notes for specifics on external control parameters & MIDI mappings.