Launchpad Mono Step Sequencer (previously known as Launchpad Bassline Sequencer – changed the name to better reflect the functionality). Sequence anything monophonic – basses, leads, arpeggios, etc. Can also be routed into a chord generator to sequence chord progressions.
Features:
– Monophonic step sequencer with 1-32 steps per bank
– Per-step velocity and gate adjustment
– 2-octave keyboard, with root note/scale selection – out-of-scale notes are dimmed
– Steps can be programmed manually or live recorded during host playback
– 16 banks to program sequences. Manual bank cueing and bank chaining
– Copy/paste to quickly copy a sequence to another bank
– State save and restore – sequences can be saved with the project in AUM
– Transpose individual steps or the entire sequence by half-steps or octaves
– Adjustable pulses per quarter note (PPQN) to change the playback speed relative to the host tempo
The download zip file includes an instruction pdf showing all the functions and setup
AUM Routing –
Mozaic (LPMONO) to MIDI Control, Destination Audio Unit, Launchpad Mini Mk3 MIDI In
Launchpad Mini Mk3 MIDI Out to Mozaic (LPMONO)
Enable ‘Receive MMC’ and ‘Rewind when stopped’ in Transport MIDI Control
IMPORTANT – Filter the destination audio unit in AUM to MIDI channel 12 to avoid stray notes
Quick Start – Hold a Launchpad keyboard note and press a step to add it to the sequence, or to live record steps, press play, press the live record button and enter notes on the keyboard – the notes and their gate values will be recorded to the sequence
Also works in Loopy Pro. Follow the steps below to setup…
1. Connect Launchpad to iPad
2. Launch Loopy Pro and start a new project
3. Open the mixer view
4. Press ‘+’ button (bottom right of screen), Add MIDI, Launchpad MIDI Out
5. Press ‘+’ button, Add MIDI, Mozaic
6. Press ‘+’ button, Add Audio Unit Input, then select an AUV3 (I’ve used Korg Gadget Berlin in the example below)
7. On the Launchpad mixer channel, tap on ‘+’ in the Destinations section, add Mozaic
8. On the Mozaic mixer channel, tap on ‘+’ in the Destinations section and add Launchpad MIDI In and Berlin as destinations
9. Tap on the Berlin destination you have just added and set to channel 12 (top slider) for Launchpad Mini Mk3 or channel 13 for Launchpad X
10. Open the Mozaic GUI and load the sequencer script
11. This step is optional – do this if you want to configure the Play/Stop button on the Launchpad: MIDI Learn (main menu) the Play/Stop button in Loopy Pro and bind it to the bottom right button (CC19) on the Launchpad
12. Go to Control Settings (main menu), MIDI Devices, Launchpad MIDI Out, and disable feedback
13. Select a tempo
14. Program a sequence on the Launchpad. Tapping a doughnut will record and loop the sequence. The Launchpad sequence can then be cleared and another one created, which can be recorded to another doughnut, and so on…