Base Program
* Modulation multi-effect. Combines grain triggers, reverb, filter, tremolo & panners.

* Insert Mode Program. Program Mix at a wet 60%. Adjust for prominence of effect.
* GrainMod into TremoloPan. Where’s the ka-boom in the optional Parallel routing?
* All controls programmed for an interactive approach.

HOTKNOBS
Program [P] HotKnob – default (5 OR CC#2)
* Select the waveshapes for all modulations.

Preset [A] HotKnob – default (8 OR EXP1)
* Adjust the depths for all granular modulations.

Preset [B] HotKnob – default (66 OR CC#1)
* Adjust tremolo depth, panning & waveform shaping.

PEDALS
EXP1 (saved @ full Heel)
* Increases rates of all modulations, semi-synchronized, with manual mod.
* In conjunction with 1/8th speed & braking Performance switch.

EXP2 (saved @ full Heel)
* Increases the granular buffer & delay panning with reverb level.
* Increases secondary amplitude & frequency modulation for tremolo panner.

SWITCHES
* AUX 0 = default
* AUX 1,2,3 mapped to HS1, HS2, HS3 (momentary)
* AUX 4,5,6 mapped to HS1, HS2, HS3 (latching)

Program Alternates
0). Mainly reverse – light reverb – manual retrig – mostly sine mods – moderate HP filter sweeps.
1). All forward delays – medium reverb – manual retrig – ramp mods – light LP filter sweeps.
2). 1/2 forward / reverse – reverb touch – env trig – percussive mixed mods – light HP filter sweeps.
3). All reverse delays – heavy reverb – env trig – S&H + SQR mods – deep HP filter sweeps.

PERFORM
1). [P] Act/Byp
2). G/M RETRIGGER (CC#83)
3). T/P RETRIGGER (CC#83)
4). HS1 [L]
5). HS2 [L]
6). BRAKE/SPEED

See the Program Notes for specifics on external control parameters & MIDI mappings.