Hey everyone,

Use your Zoia stomp switches with 2 functions. Single and double press.

Limitations:

– Single press switch is delayed by however long you set the delay + some internal delay.
– Single press can never be closer together than the delay length.
– While the delay line is hot you can not use other switches (base setting is 200ms)
– Any pedal presses after the double press will be filtered out

This is a two-in-one patch. On page zero you find a version that works with just one switch. The output for the single press is on the ‘9’, the double tap is on the ‘W’. Set double press max speed on ‘L’.

Page 1 and 2 are for all switches to be used with single and double taps. Mind that there’s only 1 switching circuit to keep this patch light. This means your SHOULD NOT press different pedals within the delay lines time setting (default 200ms, set this on page 1 under “M”. 300-400 recommended for use with your feet.). So for instance pressing left and middle within 200ms of each other will probably break things… but that’s on you ;)

Page 2 shows the outputs. Bottom row are double presses (latched). Second from bottom row are the single presses. They are aligned with the corresponding switches.

If you don’t need latches: the top switch on page 2 is single clicks, the switch under the top switch is the double click switch. Output 1 is left, 2 is middle, 3 is right.

If you only need one switch with double tap delete page 1 and 2. If you want to use all switches with double tap delete page 0.

Feel free to use this in your patches. If you publish patches with this circuit please attribute, that’s all I ask for.