This Loopy Pro template sends the root note and scale mode of your song to your Exquis when the song is loaded.

:: To Use:
1. Set the left dial to the root note of your song.
2. Set the right dial to the scale mode of your song.
3. In your “Control Settings”, add two Follow Actions under “Load Project”:
* Retrigger Current Value: Stepped Dial “Root”
* Retrigger Current Value: Stepped Dial “Mode”

With these actions in place, Loopy Pro will trigger these dials to send their current values when the project loads, which will update your attached Exquis to display the matching layout.

:: Requirements
Intuitive Instruments Exquis MPE Controller
Firmware version 2 or higher
You should have the default layouts stored on the Exquis for the labels here to match what is loaded

:: Details
Each dial sends 3 MIDI SysEx messages to the Exquis whenever a new value is selected. The first message turns on Developer Mode for the Pads, the second message sets the Root note or Scale Mode, and the third message turns off Developer Mode.

For example, this message sets the root note to C:
F0 00 21 7E 7F 00 01 F7
F0 00 21 7E 7F 06 00 F7
F0 00 21 7E 7F 00 00 F7