Patch to control parameters of the Eventide H9 with different types of sequencers. Can also be changed to whatever CC number you want for whatever device.

Currently set at MIDI Channel 9 for the Eventide H9.

Page 0. Pushbutton presets, Top row of Blue pushbuttons select a parameter that will be sequenced. Rows 3&4 of Magenta pushbuttons will select what ‘type’ of sequencer is selected.

Page 1. Switches. Two sets of Out Switches. Top yellow is the CC in from the sequencers, the out sends to the parameters, and the pushbuttons on Page 0. change what channel is selected on the Out switches. The lower Out switch is the sequencer type selector.

Page 2. Parameters. Row 1&2 of Red CC Out for Parameters 1-10. Row 3 Orange CC Out for Tempo, Hotknob, Volume etc (all the other controllable CC for the H9 but these are not connected to the sequencers, just here for tweaking if you need to control the pedal etc).

Page 3. Sequencers 1 – The engine for the sequencers, you change change the amounts in each sequencer for desired CC out Curves, snaps etc.
Page 4. Sequencers 2 – Same as above.
A note on the sequencer types – I tried to do a varied selection of types including 0-100%, 100-0% snap and also the same but with a slew limiter to give more of a glide/fade through the CC.
Also, 3 step CC sequencers of 0-50-100%, 100-50-0% both snapping and fading CC options.
Two sets of fading 4 step sequencers of 0-25-50-100% and 100-75-50-0%
Only one parameter at a time can be sequenced for this patch just to try and keep the number of modules down. Will expand this to change multiple parameters soon