Drones Of Surgeris VI is a 6 polyphony synth with generative and double sequencer with rich texture and one granular effect.
The synth have insane sound power is a masterpiece for any kind of ambient like drone, space effects, FX and ambient pads depending on synth cycle, Befaco Iroi is control by LFO frequency position knob.

Ambient engine:
1) Befaco Iroi will change the sound in ambient with endless and a lot of variety of sound effects.

Sound cycle:
1) To extend the sound cycle go to Seriously Slow LFO and increase Duration Multiplier (knob) every time when voltage is up to 1V output to Befaco Iroi (Randomize) will change sound cycle.
2) Example: if Seriously Slow LFO is check ‘minutes; in Time Base and digits are 49 is mean sound cycle will be long 49 minutes after the cycle is finished will change the sound in Befaco Iroi Randomize option. That is perfect for long or short ambient sound.
3) to change fast between sound cycles if you do not like the current sound ambient, go to Seriously Slow LFO and change Duration Multiplier (knob) to minimum or that is 1.0 (means 1 minute cycle) after cycle is changed and you like the new sound ambient increase Duration Multiplier (knob) to 38 (means 38 minute cycle),
That option is give very huge different sound variety or presets. Depending on synth cycle. Like example current synth cycle is a ambient but when new cycle come is send a 1V signal to IROI Randomize, which new cycle can be drone or ambient but with different sound.

Info:
In every sound cycle the synth will generate different sound, LFO frequency knobs will change the sound as well by adding or remove sound effects/textures, also depends on which position is LFO frequency knob. The synth is setup for slow ambient with slow sound transition.

How to get maximum from the synth or more sound effects:
first go to Befaco IROI (ambient engine) press on button SHIFT 5 knobs will turn in red – filter, resonator, mod speed, echo and ambience change filter knob from LP to BP, HP or CP that will change the synth sound in general, or filter position knob, Echo knob and etc. after you finish with your changes press button SHIFT all 5 red knobs will turn to normal. Use filter VCA and Ambient faders (Befaco IROI) to change sound in general. Modulation knob and modulation speed will add some sweeping effects or change modulation type (press Shift button)

Sound effect (VCA) and Octave
1) sound(VCA) this option is give amazing feature to change current sound with level on VCA.
first go to Octave module and change octave shift from -1 to -4 and from +1 to +4 if octave is on shift 0
2) Octave (VCV) change synth octaves in sound effect.

Dual MIDI sequencer
1) NoteSeq16 is a normal sequencer which Sloth module is change notes by auto.
2) Galaxy sequencer is totally control from the clock.

Dual ON/OFF module:
These modules have double function:
1) a button 1 to turn ON/OFF the melody comes from NoteSeq16 and the same time is change the sound in global by sending to Befaco IROI filter cuttoff CV input waveform comes from LFO triangle wave.
2) a button 2 to turn ON/OFF the melody
comes from Galaxy sequencer which here the clock is control the melody, also at the same is send new waveform to Befaco IROI filter cuttoff CV input waveform comes from LFO saw wave.

Filters:
you have 6 filters 1 main filter on Befaco Iroi
6 filters is to add ambient/effects.

LFO:
1) LFO is modulate Befaco Iroi filter cutoff CV input.

Both sound visualizers:
colors change pattern depends on frequency on LFO slow or normal mode.
left and right sound visualizer is show up frequency on LFO
Also this option is work like frequency visual indicator.

Synth extras:
1) distortion x 1 (global – mixer)
2) waveshaper x 2 (which 1 is for global – mixer)
3) two MIDI sequencers with ON/OFF option
3) Exciter x 1 (global – mixer)
4) Resonator x 1 (global – mixer)

Version 2.7 update
MIDI sequencer NoteSeq16 ON/OFF melody module was monophonic changed with module Fade (Count Modula) which is support a polyphony.

Synth skins:
You have 5 synth skins in HD. The synth and skins are Included in download ZIP pack. To open the skins right click on module Purfenator (synth name) module find ‘Image Background’ > Load image next go to directory folder where is the background image and click open.

Real synth gem for ambient, drone, space effects or pads !

★ ★ ★ ★ ★

—krasi—