Insert Mode Program – Series Routing – Program MIX 50%. Use the new Pitch Type in RingMod, upstream from the Reverse algorithm. Distorted pitch effects, further modified by X-Fade, into reverse offsets echoes. Programmed for stereo use.

All three HotKnobs are pre-programmed for making fine adjustments to several of the effects. Customize the sound, using these variations:

* [P] HotKnob (CCW) – reduces the RingMod Intensity and Reverse Wet Mix. [default = 100]
* [A] HotKnob (CW) – increases the RingMod Rate, readout in Hz; locked to intervallic steps. [default = 0].
* [B] HotKnob (CW) – adds to the base Feedback levels for Reverse Delay A & B. [default = 0].

EXP1 sweeps down the RingMod Pitch from +1200 cents to -1200 cents, while dropping the Reverse crossfade value from 100 mS to 3 mS.

Other options include Brake / Speed – Fast/Slow on RingMod, REPEAT loop on the Reverse delay buffers, O.G. Ring Mod with rate changes & a single Reverse delay, smoother quarter-note Reverse delay looping, with maximum (non-oscillating) Feedback, plus harsher String-Type modulation; both with momentary triggering.

See the Program Notes for more information on the PERFORM switch mappings.