A patch to control the parameters and presets of the Chase Bliss Brothers (Check the CC mapping for other CB pedals and just re-name the first page to match up to whatever you need), also a sequencer that sends CC out to the different parameters.
Page 0. – CC out for the parameters/Dials (Each channel Gain, Tone, Type. As well as Master, Mix, Stack Type, Bypass and expression) Tweak here to control a parameter (these are linked to the sequencers so they will be affected)
Page 1. – PC Presets – Pushbuttons for sending PC MIDI out to change saved presets, starting from
PC 10 up to 41 (just where I started and ended my presets from – change back to 0 if you need with the bottom right module and copy more pushbuttons and increase the connection strength to the PC out number)
Page 2. Pushbutton presets, Top row of Blue pushbuttons select a parameter that will be sequenced. Rows 3&4 of Magenta pushbuttons will select what ‘type’ of sequencer is selected.
Bottom row is MIDI clock in and a Clock divider to control the rate of the sequencers, the bottom right White pushbutton will turn on/off the routing of the tempo to the sequencers.
Page 3. – Switches. Two sets of Out Switches. Top yellow is the CC in from the sequencers, the out sends to the parameters, and the pushbuttons on Page 0. change what channel is selected on the Out switches. The lower Out switch is the sequencer type selector.
Page 4. – Sequencers 1 – The engine for the sequencers, you change change the amounts in each sequencer for desired CC out Curves, snaps etc.
Page 5. Sequencers 2 – Same as above.
A note on the sequencer types – I tried to do a varied selection of types including 0-100%, 100-0% snap and also the same but with a slew limiter to give more of a glide/fade through the CC.
Also, 3 step CC sequencers of 0-50-100%, 100-50-0% both snapping and fading CC options.
Two sets of fading 4 step sequencers of 0-25-50-100% and 100-75-50-0%
Only one parameter at a time can be sequenced for this patch just to try and keep the number of modules down. Will expand this to change multiple parameters soon
