# BUCHLA
version : 2.38.5
**Character:** Buchla-style macro-oscillator pour Organelle S2 — deux moteurs de synthèse sélectionnables, style West Coast.
—
## Moteurs
### WestCoast (moteur 0)
Voix Buchla classique — triangle carrier avec FM, wavefolder, low pass gate et reverb spring.
“`
modulateur (freq/2, FB sur lui-même) → triangle carrier (FM) → wavefolder → LPG → spring reverb
“`
| Knob | Nom | Rôle |
|——-|———-|—————————————————————|
| knob1 | Modf | Contrôle LPG + FM : 0→0.5 ouvre le LPG, 0.6→1 injecte la FM |
| knob2 | Wave | Drive du wavefolder, 1× → 6× |
| knob3 | Contour | Forme de l’enveloppe AR (voir tableau) |
| knob4 | Feedback | FM feedback du modulateur sur lui-même (0 = pur, 1 = chaos) |
#### Contour (knob3) — forme d’enveloppe AR
| knob3 | Attack | Release |
|————|———|———|
| 0.00 | 5 ms | 50 ms |
| 0.50 | 5 ms | 800 ms |
| 0.75 | 100 ms | 400 ms |
| 1.00 | 150 ms | 2.2 s |
L’enveloppe pilote à la fois l’amplitude du LPG *et* la fréquence de coupure (comportement vactrol Buchla — plus fort = plus brillant).
—
### Granulaire (moteur 1)
4 grains déphasés, désaccordés par Scatter, filtrés par l’enveloppe AR commune.
“`
4 × triangle (scatter) → fenêtres sinus déphasées → mix → LPF (env)
“`
| Knob | Nom | Rôle |
|——-|———|—————————————————|
| knob1 | Densite | Taux de déclenchement des grains (1 → 40 Hz) |
| knob2 | Texture | Taille du grain (10 ms → 300 ms) |
| knob3 | Contour | Enveloppe AR partagée (même table que WestCoast) |
| knob4 | Color | Scatter — désaccordage entre grains (0 → 100 cts) |
—
## Opération
### Sélection du moteur
**Shift + G#+** (avant-dernière noire) — bascule entre WestCoast et Granulaire. Le nom du moteur s’affiche brièvement sur l’OLED.
### Shift menu
| Touche | Fonction |
|——–|——————–|
| C# | Play / Stop |
| D# | Arm Recording |
| F# | Preset précédent |
| G# | Sauver preset |
| A# | Preset suivant |
| C#+ | Octave – |
| D#+ | Octave + |
| F#+ | Latch on/off |
| G#+ | Changer de moteur |
Les touches blanches (Shift maintenu) sélectionnent les patterns d’arpège. Aux + encodeur = BPM.
Based on C&C PLAY patches.

Is it working on S2 only?
no for all version normally, u have to try it and send me a feedback
I tried it on my Organelle M and I think something’s not right with the sound. When I switched the engine from West Coast to Granular the parameters freeze. What I mean by the sound not sounding alright is there’s some buzzing that I couldn’t remove. Hope that helps.
I got the same issue on my Organelle M (OS 5)…