Insert Mode Program. Configured for Series Routing (default). Separated, milder and more under control in optional Parallel Routing. Program MIX 65%. [P] In Gain 12 dB boost (via EXP1). Aggravate into PitchFuzz. Programmed for stereo use.

1.8.6 update required for the two new algorithms: Aggravate & Sticky Tape.

Aggressive riff rock, with extensive control over dynamics, added overtones, octaves, doubling & detuning. Balance focus on lower/upper octaves and/or distortion characteristics using your instrument’s volume control, EXP1 and HotSwitches. Other combinations add panned delays and methods of pumping compression.

EXP1 sweeps Program In Gain (-6.0 to +6.0 dB) with Aggravate Pump Rate & Release (applies to HS3=ON). EXP2 (optional) sweeps Aggravate Bias with PitchFuzz Delay A & B (saved at Heel). Increase its Feedback with the [B] HotKnob.

All three HotKnobs are pre-programmed for making fine adjustments to several of the effects. Customize the sound, using these variations:

* [P] HotKnob (+/-) – adjust Fuzz & Tone in both Aggravate and PitchFuzz [default = 80]
* [A] HotKnob (+/-) – adjust Aggravate Mids [default = 70].
* [B] HotKnob (CW) – increase Feedback in PitchFuzz [default = 0].

* MIDI CC#7 Aggravate Pump Depth
* MIDI CC#8 Aggravate Mix
* MIDI CC#10 PitchFuzz Group/Arp Delay
* MIDI CC#16 PitchFuzz Pitch Amt
* MIDI CC#17 PitchFuzz Pitch A
* MIDI CC#18 PitchFuzz Pitch B
* MIDI CC#19 PitchFuzz Pitch C
* MIDI CC#70 Aggravate Thick
* MIDI CC#71 Aggravate Resonance
* MIDI CC#74 Aggravate Filter Env
* MIDI CC#80 Aggravate Env Shape
* MIDI CC#81 Aggravate Octave

HS1 (M) momentarily shifts Aggravate & PitchFuzz to upper octaves & squeals. HS3 enables the LFO Rate PUMP Control in Aggravate, with its parameters variable via EXP1. The default Manual PUMP & its override HS3 reside on both PERFORM pages.

See the Program Notes for more information on the PERFORM switch mappings.