Insert Mode Program. Program MIX 50%. Ducked Delay into Aggravate.

* Series (default) – clean input signal ducks distortion delay blooms.
* Parallel Routing – dirty input ducks clean delay blooms.
* Programmed for stereo use.
* 1.8.5 update required for the two new algorithms: Aggravate & Sticky Tape.

Panning delay blooms, clamped down hard by input signal at default settings. Two options: clean to dirty repeats, or the retrograde: dirty-to-clean repeats. Adjust the overall delay parameters with [P] HotKnob, EXP2, or TAP. Feedback from zero-to-looping or filter response with the Preset HotKnobs.

EXP1 sweeps Aggravate Fuzz, Mids, Bias and Pump Depth, for sweeping disintegration. And now for the real fun: EXP2 (optional) is mapped to the [P] HotKnob, for dynamic changes to delay times & pump variations (saved at fixed-43).

All three HotKnobs are pre-programmed for making fine adjustments to several of the effects. Customize the sound, using these variations:

* [P] HotKnob (+/-) – adjust Ducked Delay A & B + Aggravate Pump Rate [default = 43 – EXP2]
* [A] HotKnob (+/-) – adjust Ducked Delay Feedback A & B [default = 40].
* [B] HotKnob (+/-) – adjust Aggravate Filter Env [default = 85].

* MIDI CC#8 Ducked Delay Mix
* MIDI CC#12 Filter
* MIDI CC#13 Tone
* MIDI CC#40 Aggravate Mix
* MIDI CC#79 Thick
* MIDI CC#80 Octave
* MIDI CC#81 Env Shape

Other options include Program-wide TAP, retrigger LFO in Aggravate, and momentary or latching REPEAT in Ducked Delay. HS1 optimizes Depth & Release for Manual PUMP Control and enables PUMP switch.

See the Program Notes for more information on the PERFORM switch mappings.