*** Note: Version 1.2.5 is significantly different, and I believe better, than the previous versions. Huge improvements under the hood and a much cleaner, more compact user interface. ***

Band Delays is a processor rack send effect for Drambo. It is inspired by the Band Delays algorithm from the legendary H-3000 rack unit. Eight independent filter/delays combos in parallel with modulation of filter cutoff. Tons of sound design potential!
DELAY TIME: Sets time for the 8 delay lines. As delay time is increased, so is the temporal separation of the individual delays from each other.

FEEDBACK: Global feedback for the 8 delay lines.

FREQUENCY: Sets the base frequency for the 8 band pass filters. This control is interacts with the FILTER SPREAD control.

RESONANCE: Global resonance for the 8 band pass filters.

FILTER LFO DEPTH: Sets the depth for an LFO that modulates the 8 bandpass filter’s frequencies.

FILTER LFO SPEED: Sets the speed of the LFO.

FILTER SPREAD: Spreads the frequencies of the 8 band pass filters across the spectrum. Depending on the setting of this control and the FREQUENCY control, some filters may be too high or low to hear. With this control fully counter clockwise, all filter frequencies are the same.

LO-FI: Applies but depth and sample rate reduction as well as antialias filtering.

ECHO SCATTER: This is a level control for the 8 delay lines. Nearly every permutation of delay levels is represented, so just torn the knob until you find something you like. Lots of variations to be found here! Roughly speaking, echo density increase as you turn the knob clockwise.

WET/DRY MIX: Self explanatory.