The second part of the sequence from Anne Clark’s fantastic 1984 track “Our Darkness”: https://www.youtube.com/watch?v=OguHIyNNblM
The melody sequenced here is © by the original writers and publishing company; covered here in the framework of fair use for educational purposes. Sequence starts from a 4th above the root key that you play. I played it in E in the video below, original key is rather E flat.
The sound is mainly 8-bit BITCRUSHER into lowpass LADDER filter (filter frequency controlled by expression pedal) into MONO CHROMA pitch shifting. 16-step sequencer controlling PITCH L, plus EXP PEDAL 3 Modulation Matrix is used to route the sequencer also to PITCH R.
For the video below, I first recorded 5 bars of the beat (patch “Beat #0”, available here) into the LVX looper. Then, I overdubbed the second part of the melody with this patch into the looper, on the 5th bar. This was necessary since the LVX cannot do seamless patch transitions; switching between two presets will always introduce a pause, and even with global setting “spillover active” you cannot have continuous playback between two sequencer presets. Finally, I stopped the LVX looper, started to play the first part of the sequence (patch “Our Darkness”, available here), and brought the looper in. In the 5th looper bar where the second melody part comes in, I just pushed the expression pedal all the way down to heel position to filter away the first melody for that bar.
Disclaimer:
Most of my patches are made from scratch (some started from factory presets). Most require firmware 1.1 (or possibly higher). Most were programmed with an expression pedal hooked up to the LVX. So, if the preset does nothing or way too much, you may have to connect an expression pedal an experiment with pedal positions :-)
Check my blog, http://theguacamolexplosion.eu/
