Base Program
* ‘Utilitarian’ grain delays – reverse & forward – with rapid decay.
* Individual Tap switches & HotKnobs for re-configuring the overall timing.

* Insert Mode Program. Program Mix 45% (adjust for effect presence).
* GrainMod in Parallel with GrainMod.
* Gets extra-long & crazy in the optional Series routing.
* All controls programmed for an interactive approach.

HOTKNOBS
Program [P] HotKnob – default (50 OR CC#1)
* Adjust all depths of modulations in both instances.

Preset [A] HotKnob – default (50 OR CC#2)
* Adjust delay time, durations & all modulation rates in GrainMod 1.

Preset [B] HotKnob – default (70 OR CC#3)
* Adjust delay time, durations & all modulation rates in GrainMod 2.

PEDALS
EXP1 (saved @ full Heel)
* Cross-mixes forward & reverse delays across both effects.
* Cross-pans between the effect pair.

EXP2 (saved @ full Heel)
* Increases reverb for both effects.

SWITCHES
* AUX 1,2,3 mapped to HS1, HS2, HS3 (momentary action)
* AUX 4,5,6 mapped to HS1, HS2, HS3 (latching action)

Program Alternates
0). Rev/Fwd – Env triggers – minimal ‘verbs – Sine + Sine mods.
1). Fwd/Rev – Manual retriggers – moderate ‘verbs – Ramp Down + Up mods.
2). Fwd/Fwd- Env triggers – zero ‘verbs – S&H + Square mods.
3). Rev/Rev – Env triggers – bigger ‘verbs – Peak + Triangle mods.

PERFORM
1). [P]Act/Byp
2). TAP [A]
3). TAP [B]
4). HS1 [L] – Manual Retriggers
5). RETRIGGER G/M1 LFOs (CC#83)
6). RETRIGGER G/M2 LFOs (CC#83)

See the Program Notes for the specifics on external control parameters & MIDI mappings.