If you are using the 4-cable method to dual-route your Eventide H90 through both your amplifier’s input and effects loop, you will find that almost every factory preset needs to be reconfigured…

This preset pack is simply the 99 factory presets reconfigured for the 4-cable method – with modulation, delay and reverb and other appropriate algorithms routed through the effects loop for optimal performance in this scenario.

(To utilize this method with the H90, enable “Dual Routing” in the Global Settings menu, set Input 3 and Output 3 to either Line or Instrument Level under the I/O Settings, and run your instrument through Input 1 / Output 1 of the H90 into the amplifier, and out of the amp’s effects send through Input 3 / Output 3 of the H90 and back to effects return. Add whatever you want in-between, but it’s best to place overdrive pedals after the H90 to prevent clipping and to keep the unit out of any noise gate’s loop to prevent unwanted effects dampening.)