fun little multi-fx patch: phaser, flanger, chorus right at your finger tips. use the button in the top right corner to switch between signal routes to one of the three. tap tempo lives on the left side of the device (pink) you will know when you’ve entered a tap successfully because of the little light show that appears to the right of the input button. Flashing row of pixels below indicates the current rate for each FX. Tap tempo is processed through a clock divider set to 1/4 before hitting the input of each effect. this results in smoother outcomes from the core effects when tapping in a tempo rather than that of a 1:1 tap input to rate.

that left button though? momentary tremolo effect right before the output. This is accomplished by having an LFO control the VCA before output. Change up the LFO waveshape to get different “tremolo effects” i have it set to square with a 4/1 ratio so the tremolo will always operate at a proportionately faster rate than the core effect selected. Blue row of pixels indicates the current rate of the trem when the button is pressed