Insert mode, Stereo.

This PROGRAM includes a DualVerb PRESET utilizing Expression control sweeping both Verbs from 1/4 thru various Decay Lengths including Infinity to Freeze. This in Series with a very Basic Looper that can ‘defrost’ or loop the Frozen/Infinite or other various Decay Length parts freeing DualVerb up again and to overDub and layer more and as much as needed.

An Auxiliary Switch is really needed to fully realize more functions of the Looper Algo but users can ‘get by’ with the programming here.

The DualVerb’s Mix and Decay A Length and Delay Wet Mix are programmed in the Quick Knob locations where those all are visible on the H90’s screen while sweeping through those parameters for visual reference. Don’t forget you can sweep to the Infinite Decay A & B’s Lengths, though it can be a little tricky to land on it (see Hot Switch 2 setting).

I programmed this DualVerb PRESET to allow for chords that can be played fairly quickly while sweeping the Expression pedal all the way to the down down or Freeze position. The same for guitar single note swells where I may sweep the Expression pedal to 3 bars lengths, 4 bars, etc…and not going down enough with the Expression pedal to reach the Infinite or Freeze part of it. So it is pretty versatile for my needs just in those two aspects.

Hot Switch 2 places only Decay A to the Infinite setting so that Decay B can be anywhere in it’s 1/4 through Infinite to the Freeze range. You can then layer Infinite sections over those varied Decay B Lengths, again adding more versatility to the potential sounds/uses.

Programming notes:

Expression control also for DualVerb Mix.

Looper Record/Dub & Stop programmed.

Hot Switches only change DualVerb PRESET settings.

HS1 (M&L): Tone A & B increased for brighter Verb, Resonance shifted more to A, Mix & Size increased; HS2 (L): only Decay A set to Infinite.