A Moog-style lowpass ladder filter with some resonance, affecting the LVX looper content. Expression pedal controls filter frequency and resonance. HOLD (holding current preset footswitch) will turn down looper level and bring in a long reverb instead; good to end a loop. Attention: Releasing the footswitch will bring the looper back; so keeping the footswitch pressed while switching over to looper mode and stopping there, as shown in the video below, is recommended :-)
Disclaimer:
Most of my patches are made from scratch (some started from factory presets). Most require firmware 1.1 (or possibly higher). Most were programmed with an expression pedal hooked up to the LVX. So, if the preset does nothing or way too much, you may have to connect an expression pedal an experiment with pedal positions :-)
Check my blog, http://theguacamolexplosion.eu/
