This is a 4Tracks Looper.
Synchronizes with all Tracks Tap Tempo and Midi Clock.
All loopers are independent and can be recorded and cleared at different lengths.
Onboard Effects：Reverse,PitchShif(Speed),Glitch/Repeat

*Please press the lower left button [reset] on the [config] page before playing.
(This will initialize the seq module.)

The following changes have been made compared to the previous version!
・The number of tracks has increased from 3 to 4.
・The number of tracks has been increased from 3 to 4.
・The phenomenon of gradual shift during playback has been eliminated.
・Shuffle playback of phrases has been added (track 4 only).
・All tracks can now be individually shifted in playback speed (pitch shift).
・The phaser effect has been eliminated and replaced with a glitch effect.
・The playback direction and speed can now be synchronized no matter how much the playback direction or speed is changed.
・Mute and effect on/off were previously possible only on the selected track, but now all tracks can be muted and effect on/off at any time (even when pressed simultaneously). (Simultaneous pressing is also possible).

See the video for details.
・Looper with 4 independent tracks.
・Synchronized with tap tempo or MIDI CLOCK.
　(Tap tempo is supported by buttons and footswitches.)
・Recording start/end timing is synchronized with tempo.
　The looper’s repeat playback timing is also managed, so
　The loopers’ repeat playback timing is also managed so that the timing does not deviate with each repeat.
・All tracks can now be cleared individually. (Press and hold the left footswitch)
　A new recording can be started immediately after clearing a track.
・Glitch (short repeat) playback is available on all tracks.
　The track repeats for a set length of time from the moment the button is pressed.
　The lengths that can be set are “triplet,” “8beat,” and “16beat”.
　The length can also be changed during repeat.
・All tracks can be muted individually.
・Tracks 1~3 can be played in reverse.
　Track 4 can be played back by randomly replacing the recorded sound.
　(Recorded phrases are divided into 8 equal parts and played back at random.)
・All tracks can be pitch-shifted by changing the playback speed.
　The amount of pitch shift can be set for each track individually on the [config] page.
　Also, only track 4 can be set to a mode that alternates between normal and pitch shift.
・Whenever reverse or pitch shift is performed, playback is performed from the original position that is synchronized with the tempo at the timing when it is turned off.
　Also, during reverse or pitch shift, the loop is synchronized to the tempo at the timing when it is played back to its original length.

●Description(See the video for more details.)
○FOOT SWITCH
・Left
Recording→OverDub→Play→OverDub→Play→OverDub…
・Left(Long Press)
Clear Track
・Middle
TapTempo
・Right
Select Tracks　1→2→3→4→1→2→3…

○PushButton(Main Page)
・LightBlue
TapTempo
・Yellow
Mute(Track1~4)
・Purple
Reverse(Track1~3)
・Blue
Shuffle(Track4)
・Pink
PitchShift(Track1~4)
・Surf
Glitch/Repeat(Track1~4)
・Three buttons in the center
Glitch/Repeat Speed(Triplet/8beat/16beat)

○PushButton(Config Page)
・Left Pink
PitchShiftEdit(Track1~4)
・Center Pink
PitchSEQ Switch(Track4)
・LoweLeft
ResetButton(AllTracksClear&Initialize SEQModule)