I was asked on my Facebook page why I don’t always do full mixdowns in SunVox. I created this 32 channel, 8 buss mixer SunVox project template file as part of the explanation I.e. I’d never built a mixer in SunVox and you need one to mix properly. So here it is. You need to turn layers on in SunVox. Layer 3 hosts 32 mixer channels prewired (rewire channels to busses as required) to the Master channel on layer 5, pre-loaded with a basic mixer strip comprising compressor, 5 band EQ (Hi and Lo shelf, 3 parametric) 4 FX sends, and a clipper. Layer 4 hosts 8 Busses which are pre wired to the Master (rewire if you require sub busses) with the same channel strip as the channels. Also this layer hosts the Master channel and a Channel called Sub Master which is not connected, to be used for a reference track or other uses. Layer 5 hosts the 4 Returns for the Sends. Currently I have not included Sends on these Return channels but they can be added if you wish (note to send back into a send will require 2 feedback modules to be patched in and mind your ears!). The output fader (I.e. amplifier module) on each channel, etc is your window on your mix, zoom in to see the levels, currently set for vertical and log rms.