RingMod Voice

This is an audio DSP processing preset intended only for EaganMatrix module that ring modulates the incoming L channel audio with a frequency controllable oscillator and the R channel audio with a second oscillator that can be brought up with a control. Inended for vocal processing but you can use any audio input and perform the ring modulation if you like (note you may want to adjust the oscillator ranges as noted below to a larger range).

Note: Similar to “Dalekacy preset but a bit more generic”.

Instructions:
Connect an audio source to the EaganMatrix Module’s Left input and optionally connect another audio input to the Right input (if you leave the Right input empty, the Left will be used).

Macro Controllers: (Just have fun playing around with them).
i = ModFreq (Adjusts the fixed oscillator 1 modulating frequency from 40Hz to 440Hz). This is a range that works for vocal effects but you can change this with formulka A. Note it uses an initial Fixed Y starting frequency and then W to set the range from there.

ii = LFOFreq (Applies LFO to the signal. This adjusts the amount)

iii = LFORate (Adjusts the rate of the LFO)

iv = Voice2 (Brings up the audio output of the second multiplied input).

v = v2Freq (Sets the oscillator frequency of the second multiplier – from 10Hz to 880Hz). You can change this with formula H to a different range. Note it uses an initial Fixed Y starting frequency and then W to set the range from there.

Adjust Audio Input as you see fit. This can be done in editor or in EaganMatrix Module’s Menu display (“AIn” parameter).

Leave a Reply

  • Platform:
  • Category: Effect
  • Revision: 1
  • License: Creative Commons Attribution Share Alike 4.0
  • Modified: 1 year ago
  • Views: 238
    Likes: 1
    Downloads: 26
Download
Chat